A washing machine and a dryer are two of the most essential pieces of equipment in any modern home.
If you have the space in your home design for a separate laundry room, that is great; but, if you don’t, you may want to consider buying a stacking washer and dryer to make life easier.
Standard washing machines differ from stackable washers and dryers in that they have different sets of dimensions.
For the most part, washing machine and dryer manufacturers will provide you with the measurements of their machines right immediately.
This includes the width, height, and depth of their machines.
However, while selecting the right size washer and dryer for your space, it is essential to keep in mind that you will need extra clearance around the washer and dryer.
A washer and dryer’s clearance space is basically the extra space that remains on the sides and back of the machines after they have been fully loaded.
As previously stated, this space is needed since air circulation around the machines is required in order for them to operate correctly.
Allowing for more breathing space around your washer and dryer may also assist to reduce the amount of noise that is generated when the machines are in operation.
Because of a lack of clearance space, a running washer or dryer may smash into its surroundings, inflicting harm to itself and making a disturbance in the meanwhile.
It is necessary to have one inch of clearance space between your washer and dryer, as well as anything placed next to them, in order to guarantee that you have adequate clearance space around your washing machine and dryer.
A four- to six-inch space should be left between the washer’s rear panel and the wall as a consequence of this.
Dimensions of the Washer and Dryer
In most cases, the width of a washer and dryer is about 27 inches.
If you’re intending on placing the two together side by side, you’ll need at the very least a 54-inch gap between them.
The height of a washer or dryer usually ranges from 38 to 43 inches, while the depth typically ranges from 28 to 34 inches, depending on the model.
In order to make an informed purchase, it is essential to consider whether your gadget has a top or front-loading design.
Keep in mind that you’ll need to allow enough room for the doors of the washer and dryer to open completely.
It is generally agreed that two feet of space, either on top or in front, is sufficient.
Of course, before purchasing any washer or dryer, be sure to double-check the precise measurements on the manufacturer’s website.
Clearance Space is defined as:
A washer or dryer’s clearance space (also known as clearance space around the edges of the machine) serves a variety of purposes.
The first is that it enables air to flow about the machine, which is critical for both safeties and ensuring that the equipment performs to its maximum capacity, respectively.
The second purpose is to minimize the amount of noise pollution produced.
A washer and dryer that are too near to the wall or other objects in the room may smash against them, causing a great deal of disturbance.
This is not only inconvenient, but it may also cause harm to your washer or dryer.
Additionally, washers and dryers need additional room behind them.
This is for the vents and hoses on the ceiling.
You should allow at least an inch of clearance room on each side of your washer and dryer, which means you need to factor in an additional 2 inches per machine width when calculating the necessary space for your appliances.
It’s also suggested that you allow 6 inches of clearance room behind your washer or dryer, which means you should increase the depth of the machine by 6 inches to accommodate this need.
Dimensions of a front-loading Washer and Dryer
A front-load washer or dryer is one that has a door on the front that allows you to load clothes into it.
To load or remove clothing from the units, you must first open them from the front of the unit.
Front-load washers and dryers are available in the conventional washer and dryer sizes, but you may also get front-load washers and dryers in stackable sizes.
The area in front of the washer and dryer will need to be taken into account if you are contemplating a front-load washer and dryer combination.
If you have a front-load washer and dryer, you must make sure that there is at least 24 inches of free space in the front so that you can open the door completely.
Front-loading vs top-loading
When it comes to top-load and front-load designs, the most important factors are comfort, capacity, and space.
Comfort: Front-loading machines may need more bending and reaching than top-loading machines.
The inner workings: Front-loading washers utilize a tumble technique rather than an agitator, which may consume less water but result in a longer wash cycle.
Availability of drums with capacities ranging from 4 to 5 cubic feet:
Front-loaders are equipped with drums with capacities ranging from 4 to 5 cubic feet.
The agitator has a negative effect on the top-load capacity.
Any increase in the size and capacity of the drums equates to a larger machine.
Traditional washers (and dryers) are 27 to 28 inches broad and 30 to 35 inches deep, with a height that varies depending on the model.
Allow 6 inches between the machine and the wall and 1 inch between machines when planning your layout.
Pro tip: Before you go shopping, take measurements of your home’s entrances and stairwells to ensure that a new machine will fit.
Term to Be Aware Of High Productivity (HE)
The high-efficiency (HE) designation is not applied to all front-load washing machines; however, certain top-load washing machines, particularly those without agitators, are HE models. In general, most HE washers do the following:
- Use about half the amount of water
- Have more storage capacity
- Increase the speed of rotation.
- It is possible to eliminate more water and reduce drying time.
Longer wash cycle (since they’re intended to tumble-dry your clothing and use less water in the process).
Extras are those things that make a difference.
Manufacturers are incorporating a plethora of cutting-edge capabilities into their laundry machines. Here are a few examples:
Automatic dispensers that automatically administer detergent, bleach, and fabric softener at the proper times; some machines may store many months’ worth of detergent in one container. (Includes advice on selecting the best laundry detergent, fabric softener, and other products.)
An additional rinse cycle is recommended to assist in the removal of pet hair, stubborn stains, and detergent residue.
In order to resist faster spin speeds that remove more water and save drying time, a stainless-steel tub is used.
To assist pre-treat stains and wash small loads of delicates, consider installing an integrated sink or several washing tubs.
Mobile applications and voice control via digital personal assistants are becoming more popular.
Take the following information with you: Download our helpful buying guide for washers and dryers.
All of the dryers are front-loading models.
The high drum capacity of a dryer allows wet clothes to expand as it dries, resulting in a more efficient drying process. dryers and washers that are traditional in size are 27 to 28 inches broad and 30 to 35 inches deep.
Machines that are more recent and have greater capabilities may be bigger.
A good rule of thumb is to allow 6 inches between the machine and the wall, and 1 inch between the machines themselves.
Gas compared. electricity: which is better?
Performance is generally comparable regardless of the energy source used; nevertheless, electric dryers continue to be the most common.
- A 240-volt outlet is required for an electric dryer.
- A gas dryer requires a 120-volt outlet as well as a gas line connection.
- Term to Be Aware Of: High Productivity (HE)
Because they depend on moisture sensors rather than thermostats, today’s dryers may dry clothes in as little as half the time (saving energy and protecting textiles).
Hence the name “high-efficiency.”
Using a moisture sensor, you can determine how wet your laundry is and how long it should be dried. If you dry smaller loads on a regular basis, the garments may not come into contact with the sensor as often as they should, resulting in longer drying times. When drying tiny loads, use a timed-dry cycle to assist avoid this from happening.
Dimensions of a Compact Washer and Dryer
If you have limited room, you might choose a small washing machine and dryer.
They take up less room than conventional machines and are ideal for tiny spaces where bigger machines would not fit.
Compact washing machines are 24 to 27 inches wide, 34 inches tall, and 23 inches deep.
This reduces the amount of side-by-side space required by 6 inches, from 54 inches for conventional machines to 48 inches for compact machines.
Six inches may not seem like much, but it can make a huge impact in a tiny space.
Compact washers and dryers are comparable in size to dishwashers and are often front-loading machines due to their ability to fit beneath ordinary worktops.
Their capacity is smaller than that of a regular machine, often 1.5-2.5 cubic feet vs 3.1-4.0 cubic feet for a standard-size machine.
Compact washers and dryers are 24′′-27′′ wide, 34′′ height, and 23′′ deep.
Side-by-side compact washers and dryers need at least 48′′ of space.
The majority of small washers and dryers are front-loading.
Compact machines are designed to fit under a regular tabletop.
If you have a tiny space that is taller than it is broad and doesn’t believe smaller machines will fit, you’ll need a stackable washer-dryer set or a washer-dryer combination.
Dimensions of Stackable Washer and Dryer
Unitized washer-dryers (also known as unitized laundry centers or all-in-one washer-dryers) and stackable machines are great space-saving options that are common in condominiums, flats, and compact houses.
Instead of needing 48-54 inches of room to fit two machines side by side, these choices enable you to stack the machines and use up half the floor area.
There are certain households that do not need a washing machine that can accommodate more than a dozen full-size bath towels.
Compact washers are those that are small in size.
Typically, they have a capacity of 2.3 cubic feet (and can fit about 6 bath towels)
Are typically 24 inches broad, between 33 and 34 inches tall, and 24 to 29 inches deep, depending on the manufacturer.
Typically, the dryer is placed on top of the washer (stacking parts may cost extra)
If stacking is your jam, whether it’s due to a lack of available space or a personal choice, small machines are not your only option.
Full-size front-load washing machines feature doors and control panels on the front, and many of them have optional stacking kits that enable you to stack a dryer on top of the washer when not in use.
With this downloadable guide, you can get started on your search for a washer and dryer.
Additional Points to Consider
If the height of your laundry room is more than the width, you may want to consider installing a stacked washer and dryer.
These must be bought separately since it is dangerous to stack single-use appliances.
The typical height of a stacked washer-dryer combo is about 75 inches.
In the event that you are severely limited in space, there are small washing machines and dryers on the market.
When buying one of these, make sure to verify both the capacity and the size of the drum.
Ideally, you’ll want the largest feasible drum capacity to size ratio; otherwise, you may find yourself doing a significant number of loads of washing.
Additionally, evaluate whether or not you will have enough space to move about in the room.
The suggested amount of space in front of your washer or dryer is at least 48 inches to allow for easy access.
Tips for Choosing the Best Washer and Dryer
There are a few measurements you’ll want to take and things to keep in mind throughout your search to ensure your washing machine and dryer will fit properly in your space.
Determine the kind of machine you desire: Top or front-loading washer, High Efficiency (HE), compact, stackable, gas or electric dryer and washer, Maytag, Samsung, etc.
Request brand and model suggestions from friends and family.
Online reviews are also a great method to learn more about the equipment you’re interested in.
Determine how much washing and drying capacity you need.
Have you had a big or small family?
How many loads of laundry do you wash at once?
Do you need a high-capacity machine to handle things such as comforters?
Are there any particular wash cycles you must use?
What color or finish do you prefer? Popular colors include stainless steel and white.
Obtain the precise measurements of the machine(s) you want to install and carefully study the specifications.
Determine the precise measurements of the available space – width, height, and depth.
Ascertain that the necessary hookup(s) exist where the machines are to be placed.
If your machines aren’t stacked, make sure there’s enough space between them to allow 1-3″ between them.
You’ll be able to select a washer and dryer that not only matches the size of your room but also your requirements and lifestyle, armed with this knowledge.
Our Final Thoughts
Stackable washers and dryers, as the name implies, are built so that the two machines may be securely stacked vertically to optimize floor space.
They are front-loading and have the dryer stacked on top of the washer.
A stacking kit, which may be supplied separately, is required to stack the washer and dryer.
I strongly advise utilizing only stacking kits authorized by the manufacturer for safety and compliance with most warranties.
Frequently Ask Questions
How much room do you need for a washer and dryer?
Side-by-side washers and dryers usually need a horizontal distance of 60 inches or five feet.
Add six inches to the depth of the appliances (usually are about 33 inches) for hoses and ventilation.
What is the average width of a washing machine?
A washer and dryer are typically 27 inches wide.
If you intend on placing the two side by side, you’ll need at least a 54-inch area.
A washer or dryer’s height usually runs from 38 to 43 inches, while its depth goes from 28 to 34 inches.
Is it true that all washers are 27 inches wide?
Front-loading washers are typically 27 inches wide.
Traditional and high-efficiency washers are examples of space-saving washers.
Widths and other dimensions vary by machine category, but among full-size models, machine widths typically fall within a limited range of measures.