UA-144211750-1

How to Hook Up a Gas Dryer? [9 Easy Steps]

However, installing a gas dryer is more difficult than installing an electric dryer since gas dryers are more energy-efficient than electric dryers.

It is essential to understand and utilize the correct equipment and connections in order to properly install a gas dryer.

Before you begin, double-check that your dryer is suitable for your residence.

Make sure the gas line and exhaust vent are properly connected, then follow the instructions carefully to complete the installation.

How to Seal a Gas Line on a Dryer
How to Hook Up a Gas Dryer

Other Related Articles:

How Hot Does a Dryer Get

How Often to Clean Dryer Vent

How to Get Ink out of Dryer

Overview of the article

Despite the higher initial cost of the equipment, a gas dryer may be a cost-effective option to an electric dryer.

You may be able to save some money on the new dryer by doing part of the installation work yourself.

Before you begin, double-check that your electrical outlet and the requirements of your gas dryer are the same; then, after you have assembled everything you’ll need, it’s time to get started.

It is important to remember that gas leaks are very hazardous, therefore do not try a self-installation if you have no previous expertise with these kinds of tasks or if you do not have safe, fast methods to test and repair a leak.

How To Hook Up Gas Dryer

Step 1: Switching off gas and electricity 

First and foremost, you must cut off the main gas supply directly at the meter.

The cap on the supply pipe will need to be removed, and you will need a pipe wrench to do so on the gas pipe where it comes out of the wall.

Additionally, if the gas supply was installed with the incorrect size cutoff valve, you will need to use your pipe wrench to keep the pipe in place so that it does not spin while you are removing the shutoff valve from the gas supply.

The power should always be switched off before doing any repairs or performing a new installation before beginning. Power should be turned off immediately at the breaker box.

Step 2: In this step, you will Install the connections for a Gas Dryer.

In your gas dryer installation kit, you should find instructions for installing the gas connection components for your dryer.

Recommended:  How Hot Does a Dryer Get [8 Reasons Why Dryer Gets Hot!!]

If not, consult your local hardware store for assistance.

Never hesitate to call your gas supplier if you have any questions or concerns. The majority of service providers charge modest installation costs.

Step 3: Check the Vent Hole for Damage

Double-check the vent hole on your gas dryer to ensure that it corresponds to the vent hole in your house.

You will need to cut a new dryer vent hole before continuing if this does not work.

Step 4: Clear the Area

Clean and dry the floor on which the gas dryer will be installed, as well as the area around it, before installing the dryer.

Do this after you examine the vent hole to see whether a new one needs to be cut.

This will allow you to clear up any debris that may have accumulated.

Step 5: Apply Pipe Dope to the Pipe

Take your stainless steel connector and screw it to the pipe after applying the pipe dope to the threads of the pipe.

Step 6: Look for Leaks in the System

Once the dryer gas lines have been connected, inspect them for leakage.

Combine 50 percent water and 50 percent liquid dish soap in a mixing bowl.

Apply the solution to the gas connections that you have just finished installing, and then switch on the gas supply.

If you see bubbles, this indicates that you have a leak.

Tighten and re-test until the leak has been eliminated.

Step 7: The Vent Hose should be fastened 

Fasten the vent housing to the duct using a hose clamp, then tighten the clamp with your wrench.

Keep the length of your vent line as low as possible in order to maximize the effectiveness of your natural gas dryer.

Step 8: Concluding Remarks

It’s time to connect your gas dryer to the wall.

Using the spare vent pipe, secure the dryer in position before pushing it into place once again. It should be at least three inches away from the wall to allow for circulation.

Please keep in mind that certain building regulations require gas dryers to be raised 18 inches above the ground. See whether this is applicable in your area by consulting your local norms and laws.

Step 9: Activate the device

Turn on the gas and re-energize the circuit breaker to put your new gas dryer through its paces.

How Much Should It Cost to Install a Gas Dryer in Your Home?

The cost of living will vary based on your geographic location.

For example, I can tell you how much it costs to connect up a gas dryer in our neighborhood.

If you already have a gas shut off valve (which is 3/8″ or 1/2″ in diameter) linked to a piped gas line immediately behind where your dryer sits (it shouldn’t be more than 4 feet distant), it would cost 65.00 plus components for someone to come to your house and hook up your dryer to your gas line.

Recommended:  Why Is My Dryer Not Drying [Discover the Answer!!]

A new flexible gas line and a new vent hose are usually the only replacement components you’ll need.

It is possible that you already have a long enough flexible gas line that is safe, as well as a long enough vent hose that is in excellent condition, in which case we would just charge $65.00 in a typical scenario.

What I mean by a typical scenario is that the dryer is located near to where it will be connected and that it has not been dismantled.

I would suggest that you hire a professional appliance repair company to do this task since they are familiar with how to properly connect it.

This is important since you don’t want any gas leaks.

Over the years, I’ve seen a lot of gas dryers that were improperly connected.

I hope you find this material useful.

BONUS: Connecting Gas Pipe Lines

By utilizing the appropriate fittings and connections, you can ensure that gas line connections from steel or copper pipes to stoves and clothes dryers are safe and reliable.

Tools and Equipment Necessary

  • Wrench with a range of adjustment
  • Pipe wrenches are a kind of wrench that is used to hold pipes together.

Requirements for Materials

  • Fittings
  • A pipe joint compound is a kind of compound that is used to connect pipes together.

Installation of gas connections for your oven or dryer is very straightforward – it’s really just a case of putting screws into place.

However, determining which fittings to use in particular situations may be difficult, and employing the incorrect ones might result in a potentially hazardous leak.

Packaged gas lines and fittings made of flexible stainless steel are available at home improvement and hardware shops.

The kits often include everything you’ll need, although you may need to purchase a few more fittings in certain instances.

However, before you begin, you should verify with your local building inspections department to determine whether you are permitted to install your own gas dryer connection.

We’ll walk you through three different gas piping situations.

We’ll show you one method for making each connection, but there are many more perfectly valid methods that make use of standard plumbing components.

Don’t be misled by the abbreviations FIP and MIP; they merely refer to female pipe threads and male pipe threads, respectively, and have no further meaning.

And don’t be afraid to ask for assistance while you’re shopping for the components.

Then screw all of the gas line components together to ensure that they are all the same size.

Situation 1: Connect the steel gas pipe to the rest of the system.

A gas appliance connection kit should be purchased if your old appliance is linked to the gas line through a steel gas pipe and you are installing a new appliance.

In lieu of the steel gas pipe, use the flexible gas supply lines made of stainless steel tubes to save money.

The flare fitting on the flexible gas line supply cannot be connected directly to the threaded steel pipe thread, according to the manufacturer.

Recommended:  Why Is My Dryer Squeaking [Possible Reasons and Solutions]

To complete the installation, you must use the flare fitting that is supplied with the package.

Before assembling the pipe, coat all threaded pipe connections with the pipe thread compound.

If required, the bushing may be used to decrease the current 3/4-inch female pipe thread to 1/2-inch size.  

Steel pipe connections

Using a 90-degree elbow at the stove will prevent the gas tubing from becoming kinked when you push the stove up against a wall.

First, locate and shut off the main gas valve that supplies the home before replacing an outdated valve.

Please keep in mind that the main gas valve is often situated near where the gas line enters the home.

Old-style gas valves should be replaced with contemporary ball valves that are labeled “for use with gas.”

After you’re finished, turn the gas back on.

Remember to check all of your gas appliances to determine if any of them have pilot lights that need to be re-ignited.

Our Final Thoughts

Once you’ve brought your new gas dryer home, you’ll need to make sure it’s properly connected to the gas line.

The process of connecting a dryer to a gas line is not difficult; nevertheless, if you don’t follow the instructions carefully, it may be hazardous for you and your family.

For example, improperly connected gas lines to dryers may result in gas leaking into the home’s interior.

Gas accumulation may result in an explosion if ignited, and the fumes are very hazardous to human health.

After connecting your gas line to your dryer, you can perform a simple test to verify that the connection is secure and that there are no leaks.

Frequently Ask Questions

Is it possible to install a gas dryer on your own?

Not only is self-installation a more affordable alternative, but it is also very easy to do, especially for those who are not experienced DIYers.

The installation procedures for electric and gas dryers are somewhat different; nevertheless, both can be completed with a few simple tools, a little patience, and some excellent guidance.

Is it necessary to use a specific plug for a gas dryer?

However, even though both a gas and an electric clothes dryer utilize electricity, a gas clothes dryer needs a different kind of electrical connection than an electric dryer.

It is necessary to connect the power cable of a gas dryer to an outlet that has been grounded.

Is it preferable to use a gas or an electric dryer?

In general, gas dryers outperform electric dryers in terms of energy efficiency.

This is due in part to the fact that gas dryers heat up considerably more rapidly and produce much more heat overall, which results in clothing drying much quicker.

You should definitely consider using an energy-efficient gas dryer if you want to save money on your electric bill.

About Khelly