How to Daisy Chain Routers [An Easy-Guide For You]

When using WiFi, you may dislike dead WiFi zones in your home or areas where your WiFi signals cannot be reached.

There are occasions when you get interrupted signals or a poor connection speed throughout the house.

As a result, you cannot obtain good connectivity and high-speed Internet throughout the house.

This is an issue if you wish to connect more than one device to the WiFi around the house.

You can remedy the problem by acquiring a longer-range router or a WiFi range extender.

This problem can also be solved by using daisy chain routers.

Daisy chain routers are quite useful for extending the WiFi range.

However, many individuals are unsure whether or not routers can be daisy-chained.

So, sure, we have a step-by-step technique for daisy-chaining routers here.

How to Daisy Chain Two Wireless Routers Using Wires

What exactly is the Daisy Chain?

A Daisy Chain is an alternative for connecting two routers using a wired method, allowing your network to be expanded to a greater distance.

The connection will become extremely strong, and the signal strength will significantly improve.

Furthermore, the WiFi range will expand and will be able to reach as far as you daisy chain them.

It is extremely simple and straightforward to connect the routers, but if you are doing it for the first time, make sure to follow the instructions.

Why Should Routers Be Daisy Chained?

Before you begin the process of daisy-chaining your routers, you must understand why you are doing so.

Daisy chain routers will increase the range and strength of your connection across your home.

When you require a fast connection and internet speed, you should choose the method if you are experiencing poor connections dead WiFi zones in your Big residences, if you complete multiple jobs at once, or if you are an online player.

Linking Two Routers

When you purchase a wireless router, you may realize that the wireless signal does not spread throughout your home, or that your connection becomes too weak to use when you are too far away from the router.

This can be a major issue, especially if you have numerous people or gadgets using your internet connection across your home.

There are several solutions to this problem, including purchasing a router with an expanded range or a Wi-Fi range extender.

Another way for resolving this issue is to daisy link two routers.

This involves connecting two routers via a wired connection.

You’ll be able to connect to the same network with two distinct routers, boosting signal strength across your home.

This is especially useful if you have an old router or two lying around because it saves you money.

In the next sections, we will go through daisy-chaining in further detail.

Daisy Chain Routers: How Do You Do It?

To begin, you will need the following items to complete the daisy chain router process:

You must have the original router and the second router that you want to connect to.

Check if it is compatible with your WiFi’s ISP.

To link both routers, a wireless Ethernet cable must be used.

Before you begin the Daisy Chaining process, you must first prepare your second router. Let’s see what happens. How Should the Second Router Be Prepared for Daisy Chain?

1. Start by the process.

You must first reset your router to begin the process.

To reset your router, navigate to a web page and enter its IP address.

There, you will find some instructions from the router’s manufacturer that you must follow.

Step 2: Turn off the Dynamic Host Configuration Protocol.

After rebooting the second router, you will be prompted to turn off DHCP.

Disable the Dynamic Host Configuration Protocol (DHCP).

Because when it is enabled, it can result in some redundancy, which should be avoided.

The procedure for disabling DHCP varies depending on the operating system.

We have provided step-by-step instructions for disabling DHCP in several operating systems, taking into account each user’s specific needs.

How Do I Turn Off DHCP in Windows 8/Windows 10?

Step 1: is to navigate to the Network Connections section.

Step 2: Double-click on the option for an active network connection.

Step 3: Lastly, When you click the Properties option, you will see a list of different Internet Protocol versions. Select Internet Protocol version 4.

Step 4: Select the option Properties once more.

Step 5: You will now see an option. Use the IP address listed below, and then click on it.

Step 6: You will be prompted to provide your IP address, Subnet Mask settings, and the commonly used Default Gateway.

How Do I Turn Off DHCP on Windows 7?

Step 1: is to navigate to the Control Panel area.

Step 2: You will see a Network and Sharing Center option; click it to access the Local Area Connection Link.

Step 3: Lastly, When you click the Properties option, you will see a list of different Internet Protocol versions. Select Internet Protocol version 4.

Step 4: Select the option Properties once more.

Step 5: You will now see an option. Use the IP address listed below, and then click on it.

Step 6: You will be prompted to provide your IP address, Subnet Mask settings, and the commonly used Default Gateway.

How to Turn Off DHCP on Apple Devices

Apple is distinct from Windows-based operating systems.

They have an AirPort Express incorporated within the gadget.

It is a fantastic wireless extender system of exceptional quality.

Step 1: Navigate to the AirPort Utility tab. It can be found in the Applications folder.

Step 2: You will see a Base Station option; edit the base station.

Step 3: Now, click the Network button to bring up a pop-up menu.

Step 4: Either turn it off or choose Bridge Mode from the menu that appears.

Step-by-Step Daisy Chain Routers Instructions

This instruction assumes you already have a wireless network (router one) and want to use wired Ethernet to connect a second wireless router (router two) to it.

The router used to extend your network will be Router 2.

If you don’t know the settings for router 2, it would be a good idea to reset it.

1. Begin byconnecting your PC to router number two.

2. Next, log in to router 2 and configure its settings.

To do so, either follow the instructions included with your router or type the IP address of your router into your web browser.

It can be a good idea to reset router 2 if you don’t know the settings!

3. You must then disable DHCP on the router. 2.

The Dynamic Host Configuration Mechanism (DHCP) is the protocol that assigns IP addresses to all of the devices on your network.

Because your first router is in charge of assigning IP addresses to your network’s devices, this must be disabled on your second router (using DHCP).

You may even need to do this before connecting routers 1 and 2.

An important step is to disable DHCP on Router 2.

If you don’t, there’s a strong possibility your local network will be down!

4. Next, go to the first router and figure out what subnet it uses and what IP address range it utilizes with DHCP.

For instance, 192.168.0.100 to 192.168.0.254 or 10.0.0.100 to 10.0.0.254

As a subnet, most home routers utilize 192.168.0.0 255.255.255.0. Router 1’s IP address will most likely be 192.168.0.1, although it could be different.

This tutorial will assist you in determining your router’s internal IP address.

5. Once you’ve determined this, you may provide a static IP address to your second router that is outside of this range but within router 1’s network.

This is normally done in your second router’s LAN settings tab.

Check that both routers are using the same network mask. Typically, this is 255.255.255.0 or /24.

If router 1 has an internal IP address of 192.168.0.1, the LAN address for router 2 should be 192.168.0.2.

Simply make sure that this IP isn’t being used by any other devices on your network.

Open a Command Prompt (by typing CMD in the Start Menu) and type ‘ping 192.168.0.2’ four times until the message ‘Request times out’ appears.

6. All that’s left is for router 2 to be connected to a LAN port on router 1.

Excellent work!

You should now be able to connect network devices to Router 2.

They should be able to use DHCP to get any settings from router 1.

You can also enable WiFi on the second router.

If you know the wifi networks of routers 1 and 2 will cross, make sure the wifi is on a non-overlapping channel.

Check that their WLAN SSID (wireless network name) and security settings are identical.

This may be something that our advice on channel bandwidths can help you with.

7. If you need to connect to router 2 for any reason, open a web browser and type in the IP address you assigned to it in step 5. You should be able to connect to the router at this point.

8. Now that you’re connected to your router, all you have to do is set a password for it, just like any other router.

You can also change any of your settings here if necessary.

Our Final Thoughts

Daisy-chaining the routers together is a novel approach to connect them and expand the signal’s reach as far as you want to distribute the connection.

Using the information supplied above, you will be able to easily set up the extended connection.

Follow the steps in order to fully utilize the WiFi connection.

Daisy Chain routers are incredibly efficient and superior to any other option, as other extenders can be quite costly.

If you have ancient routers, you should get an Ethernet cable so that you can connect them.

So that was our take on how to daisy link routers. Please share your thoughts in the comments section below.

Frequently Asked Questions

Is it possible to create a daisy chain of routers?

Daisy Change router

Another way for resolving this issue is to daisy link two routers.

This involves connecting two routers via a wired connection.

You’ll be able to connect to the same network with two distinct routers, which will improve signal strength across your house.

How can I connect two routers to the same network?

Daisy Chain Connect 2 routers on Network

Set the IP address of router 2’s Internet Gateway to that of router 1.

Connect the two routers using a cable connection from any of the ports 1-4 on router 1 to any of the ports 1-4 on router 2.

To make a wired connection, you can utilize a Wireless Media Bridge or a Powerline Ethernet Kit.

ROUTER 2’S WAN PORT SHOULD NOT BE USED.

Is it possible to place two wireless routers adjacent to each other?

image

Wireless routers in the home can be connected using Ethernet cable in the same manner that wired routers are. 

It is also feasible to connect two home routers wirelessly, although in  most cases, the second router can only act as a wireless access point rather than a router.

About Khelly